Solar thermal power systems use concentrated solar energy

Solar thermal power (electricity) generation systems collect and concentrate sunlight to produce the high temperature heat needed to generate electricity. All solar thermal power systems have solar energy collectors with two main components: reflectors (mirrors) that capture and focus sunlight onto a receiver. In most types of systems, a heat-transfer fluid is heated and circulated in the receiver and used to produce steam. The steam is converted into mechanical energy in a turbine, which powers a generator to produce electricity. Solar thermal power systems have tracking systems that keep sunlight focused onto the receiver throughout the day as the sun changes position in the sky.

Solar thermal power systems may also have a thermal energy storage system component that allows the solar collector system to heat an energy storage system during the day, and the heat from the storage system is used to produce electricity in the evening or during cloudy weather. Solar thermal power plants may also be hybrid systems that use other fuels (usually natural gas) to supplement energy from the sun during periods of low solar radiation.

Types of concentrating solar thermal power plants

There are three main types of concentrating solar thermal power systems:

Linear concentrating systems

Linear concentrating systems collect the sun's energy using long, rectangular, curved (U-shaped) mirrors. The mirrors focus sunlight onto receivers (tubes) that run the length of the mirrors. The concentrated sunlight heats a fluid flowing through the tubes. The fluid is sent to a heat exchanger to boil water in a conventional steam-turbine generator to produce electricity. There are two major types of linear concentrator systems: parabolic trough systems, where receiver tubes are positioned along the focal line of each parabolic mirror, and linear Fresnel reflector systems, where one receiver tube is positioned above several mirrors to allow the mirrors greater mobility in tracking the sun.

A linear concentrating collector power plant has a large number, or field, of collectors in parallel rows that are typically aligned in a north-south orientation to maximize solar energy collection. This configuration enables the mirrors to track the sun from east to west during the day and concentrate sunlight continuously onto the receiver tubes.

Parabolic trough power plant
Picture of a parabolic trough power plant.

Source: Stock photography (copyrighted)

Parabolic troughs

A parabolic trough collector has a long parabolic-shaped reflector that focuses the sun's rays on a receiver pipe located at the focus of the parabola. The collector tilts with the sun to keep sunlight focused on the receiver as the sun moves from east to west during the day.

Because of its parabolic shape, a trough can focus the sunlight from 30 times to 100 times its normal intensity (concentration ratio) on the receiver pipe, located along the focal line of the trough, achieving operating temperatures higher than 750°F.

Parabolic trough linear concentrating systems are used in the longest operating solar thermal power facility in the world, the Solar Energy Generating System (SEGS). The facility, with nine separate plants, is located in the Mojave Desert in California. The first plant in the system, SEGS I, operated from 1984 to 2015, and the second, SEGS II, operated from 1985 to 2015. The last plant built, SEGS IX, with a electricity generation capacity of 92 megawatts (MW), began operation in 1990. The seven currently operating SEGS III-IX plants have a combined electricity generation capacity of nearly 357 MW, making them one of the largest solar thermal electric power facilities in the world.

In addition to the SEGS, many other parabolic trough solar power projects operate in the United States and around the world. The three largest projects in the United States after SEGS are

  • Mojave Solar Project: a 280 MW project in Barstow, California
  • Solana Generating Station: a 280 MW project in Gila Bend, Arizona
  • Genesis Solar Energy Project: a 250 MW project in Blythe, California

Linear Fresnel reflectors

Linear Fresnel reflector (LFR) systems are similar to parabolic trough systems in that mirrors (reflectors) concentrate sunlight onto a receiver located above the mirrors. These reflectors use the Fresnel lens effect, which allows for a concentrating mirror with a large aperture and short focal length. These systems are capable of concentrating the sun's energy to approximately 30 times its normal intensity. The only operating linear Fresnel reflector system in the United States is a compact linear Fresnel reflector (CLFR)—also referred to as a concentrating linear Fresnel reflector—a type of LFR technology that has multiple absorbers within the vicinity of the mirrors. Multiple receivers allow the mirrors to change their inclination to minimize how much they block adjacent reflectors' access to sunlight. This positioning improves system efficiency and reduces material requirements and costs.

Solar power towers

A solar power tower system uses a large field of flat, sun-tracking mirrors called heliostats to reflect and concentrate sunlight onto a receiver on the top of a tower. Sunlight can be concentrated as much as 1,500 times. Some power towers use water as the heat-transfer fluid. Advanced designs are experimenting with molten nitrate salt because of its superior heat transfer and energy storage capabilities. The thermal energy-storage capability allows the system to produce electricity during cloudy weather or at night.

The U.S. Department of Energy, along with several electric utilities, built and operated the first demonstration solar power tower near Barstow, California, during the 1980s and 1990s. Three solar power tower projects now operate in the United States:

  • Ivanpah Solar Power Facility: a 392 MW three-tower project with generation capacities of 126 MW, 133 MW, and 133 MW located in Ivanpah Dry Lake, California
  • Crescent Dunes Solar Energy Project: a 110 MW one-tower project located in Nevada
  • Sierra Sun Tower: a 5 MW two-tower project located in the Mojave Desert in Southern California

Solar dish/engines

Solar dish
Image of a solar dish collector.

Source: Stock photography (copyrighted)

Solar dish/engine systems use a mirrored dish similar to a very large satellite dish. To reduce costs, the mirrored dish is usually composed of many smaller flat mirrors formed into a dish shape. The dish-shaped surface directs and concentrates sunlight onto a thermal receiver, which absorbs and collects the heat and transfers it to an engine generator. The most common type of heat engine used in dish/engine systems is the Stirling engine. This system uses the fluid heated by the receiver to move pistons and create mechanical power. The mechanical power runs a generator or alternator to produce electricity.

Solar dish/engine systems always point straight at the sun and concentrate the solar energy at the focal point of the dish. A solar dish's concentration ratio is much higher than linear concentrating systems, and it has a working fluid temperature higher than 1,380°F. The power-generating equipment used with a solar dish can be mounted at the focal point of the dish, making it well suited for remote locations, or the energy may be collected from a number of installations and converted into electricity at a central point.

The U.S. Army is developing a 1.5 MW system at the Tooele Army Depot in Utah with 429 Stirling engine solar dishes. The system is scheduled to be fully operational in 2017.