How much coal, natural gas, or petroleum is used to generate a kilowatthour of electricity?
The annual average amounts of coal, natural gas, and petroleum fuels used to generate a kilowatthour (kWh) of electricity by U.S. electric utilities and independent power producers in 2022 were:1
- Coal–1.14 pounds/kWh
- Natural gas–7.42 cubic feet/kWh
- Petroleum liquids–0.08 gallons/kWh
- Petroleum coke–0.85 pounds/kWh
The annual average number of kWh generated per amount of coal, natural gas, and petroleum fuels consumed for electricity generation by U.S. electric utilities and independent power producers in 2022 were:1
- Coal–0.88 kWh/pound
- Natural gas–0.13 kWh/cubic foot
- Petroleum liquids–12.90 kWh/gallon
- Petroleum coke–1.18 kWh/pound
The above amounts are based on data for 2022 from the Electric Power Annual, October 2023, and the simple averages of national-level annual data for electric utilities and independent power producers. They represent the annual average amounts for most of the electricity that is generated for sale in the United States, but exclude electricity generated in the commercial and industrial sectors. The fuel consumption data for the above amounts exclude fuel use for useful thermal output in combined heat and power plants.
The actual amounts for a specific generator or power plant may vary considerably from those above. The exact amounts of fuel used to generate electricity depends on the efficiency or heat rate of the generator (or power plant) and the heat content of the fuel. Power plant efficiencies (heat rates) vary by types of generators (prime movers), by type and heat content of fuels, power plant emission controls, and other factors.
Two formulas can be used to calculate the amount of fuel used to generate a kilowatthour (kWh) of electricity:
- Amount of fuel used per kWh = Heat rate (in British thermal units [Btu] per kWh) divided by Fuel heat content (in Btu per physical unit)
- Kilowatthour generated per unit of fuel used = Fuel heat content (in Btu per physical unit) divided by Heat rate (in Btu per kWh)
Data sources available for those calculations include:
- Table 7.3. Average Quality of Fossil Fuel Receipts for the Electric Power Industry ( xls )
- Table 8.1. Average Operating Heat Rate for Selected Energy Sources ( xls )
- Table 8.2 Average Tested Heat Rates by Prime Mover and Energy Source ( xls )
Monthly Energy Review, Appendices with fuel heat contents, electricity heat rates, and conversion factors
- Data on total U.S. electricity generation (Table(s) 7.2 ) and fuel consumption for electricity generation (Table(s) 7.3)
- State-level historical electricity data files with annual and monthly electricity generation and fuel consumption
- Data on fuel consumption and electricity generation by fuel/energy source at individual U.S. power plants
1 Includes data for power plants with at least one megawatt of electric generation capacity but excludes fuel use for useful thermal output in combined heat and power plants.
Last updated: October 20, 2023 with data from the Electric Power Annual
Other FAQs about Oil/Petroleum
- When was the last refinery built in the United States?
- Does EIA have data on the movement (transport) of crude oil, biofuels, petroleum products, and propane by rail?
- What do I pay for in a gallon of gasoline and diesel fuel?
- How much coal, natural gas, or petroleum is used to generate a kilowatthour of electricity?
- What is the outlook for home heating fuel prices this winter?
- Does EIA have data on U.S. oil refineries and their locations?
- Does EIA have information on U.S. natural gas and oil pipelines?
- How much oil is consumed in the United States?
- How much oil is used to make plastic?
- What types and amounts of energy are produced in each state?
- How much shale (tight) oil is produced in the United States?
- What is the difference between crude oil, petroleum products, and petroleum?
- What are petroleum products, and what is petroleum used for?
- How many gallons of gasoline and diesel fuel are made from one barrel of oil?
- Does EIA have forecasts or projections for energy production, consumption, and prices for individual states?
- What is U.S. electricity generation by energy source?
- Does EIA have data on the type or quality of crude oil?
- What countries are the top producers and consumers of oil?
- How much oil consumed by the United States comes from foreign countries?
- Does EIA have county-level energy production data?
- What other motor gasoline consumption data sources are available?
- Does EIA have information on unplanned disruptions or outages of U.S. energy infrastructure?
- How much of the crude oil produced in the United States is consumed in the United States?
- Does the world have enough oil to meet our future needs?
- How much petroleum does the United States import and export?
- What is the difference in product supplied among EIA publications?
- How do we calculate product supplied?