||A unit of volume equal to 42 U.S. gallons.
|Conventional Blendstock for Oxygenate Blending (CBOB)
||Motor gasoline blending components intended for blending with oxygenates to produce finished conventional
||Finished motor gasoline not included in the oxygenated or reformulated gasoline categories.
Excludes reformulated gasoline blendstock for oxygenate blending (RBOB)
as well as other blendstock.
|Conventional Gasoline, Ed 55 and Lower
||Finished conventional motor gasoline blended with a maximum of 55 volume percent denatured fuel ethanol.
|Conventional Gasoline, Greater than Ed 55
||Finished conventional motor gasoline blended with denatured fuel ethanol where the volume percent of denatured fuel ethanol exceeds 55%.
||A mixture of hydrocarbons that exists in liquid phase in natural underground
reservoirs and remains liquid at atmospheric pressure after passing through
surface separating facilities. Depending upon the characteristics of the crude
stream, it may also include:
Small amounts of hydrocarbons that exist in gaseous phase in natural
underground reservoirs but are liquid at atmospheric pressure after being
recovered from oil well (casinghead) gas in lease separators and are subsequently
commingled with the crude stream without being separately measured. Lease
condensate recovered as a liquid from natural gas wells in lease or field
separation facilities and later mixed into the crude stream is also included;
Small amounts of nonhydrocarbons produced with the oil, such as sulfur and
Drip gases, and liquid hydrocarbons produced from tar sands, oil sands,
gilsonite, and oil shale.
Liquids produced at natural gas processing plants are excluded. Crude oil is refined to produce
a wide array of petroleum products, including heating oils; gasoline, diesel and jet fuels;
lubricants; asphalt; ethane, propane, and butane; and many other products used for their
energy or chemical content.
|Distillate Fuel Oil
||A general classification for one of the petroleum fractions produced in conventional
distillation operations. It includes diesel fuels and fuel oils. Products known as No. 1,
No. 2, and No. 4 diesel fuel are used in on-highway diesel engines, such as those in trucks
and automobiles, as well as off-highway engines, such as those in railroad locomotives and
agricultural machinery. Products known as No. 1, No. 2, and No. 4 fuel oils are used primarily
for space heating and electric power generation.
|Finished Aviation Gasoline
||A complex mixture of relatively volatile hydrocarbons with or without small quantities of
additives, blended to form a fuel suitable for use in aviation reciprocating engines. Fuel
specifications are provided in ASTM Specification D 910 and Military Specification MIL-G-5572.
Note: Data on blending components are not counted in data on finished aviation gasoline.
|Finished Motor Gasoline
||A complex mixture of relatively volatile hydrocarbons with or without small quantities of
additives, blended to form a fuel suitable for use in spark-ignition engines. Motor gasoline,
as defined in ASTM Specification D 4814 or Federal Specification VV-G-1690C, is characterized
as having a boiling range of 122 to 158 degrees Fahrenheit at the 10 percent recovery point to
365 to 374 degrees Fahrenheit at the 90 percent recovery point. Motor Gasoline includes
conventional gasoline; all types of oxygenated gasoline, including gasohol; and
reformulated gasoline, but excludes aviation gasoline. Note: Volumetric data on blending
components, such as oxygenates, are not counted in data on finished motor gasoline until
the blending components are blended into the gasoline.
||An anhydrous denatured aliphatic alcohol intended for gasoline blending as
described in Oxygenates definition.
|Gasoline Treated as Blendstock (GTAB)
||Non-certified Foreign Refinery gasoline classified by an importer as blendstock to be either blended or reclassified with respect to reformulated or conventional gasoline. GTAB was classified on EIA surveys as either reformulated or conventional based on emissions performance and the intended end use in data through the end of December 2009. Designation of GTAB as reformulated or conventional was discontinued beginning with data for January 2010. GTAB was reported as a single product beginning with data for January 2010. GTAB data for January 2010 and later months is presented as conventional motor gasoline blending components whenreported as a subset of motor gasoline blending components.
||Includes Kerosene-type (Commercial or Military) and Naphtha-type.
||A light petroleum distillate that is used in space heaters, cook stoves, and water heaters
and is suitable for use as a light source when burned in wick-fed lamps. Kerosene has a
maximum distillation temperature of 400 degrees Fahrenheit at the 10-percent recovery point,
a final boiling point of 572 degrees Fahrenheit, and a minimum flash point of 100 degrees
Fahrenheit. Included are No. 1-K and No. 2-K, the two grades recognized by ASTM Specification
D 3699 as well as all other grades of kerosene called range or stove oil, which have properties
similar to those of No. 1 fuel oil. See Kerosene-Type Jet Fuel.
|Kerosene-Type Jet Fuel
||A kerosene-based product having a maximum distillation temperature of 400 degrees Fahrenheit at
the 10-percent recovery point and a final maximum boiling point of 572 degrees Fahrenheit
and meeting ASTM Specification D 1655 and Military Specifications MIL-T-5624P and MIL-T-83133D
(Grades JP-5 and JP-8). It is used for commercial
and military turbojet and turboprop aircraft engines.
|Liquefied Petroleum Gases (LPG)
||A group of hydrocarbon-based gases derived from crude oil refining or nautral gas fractionation.
They include: ethane, ethylene, propane, propylene, normal butane, butylene, isobutane, and
isobutylene. For convenience of transportation, these gases are liquefied through pressurization.
||Includes all finished products not classified elsewhere (e.g., petrolatum, lube refining
byproducts (aromatic extracts and tars), absorption oils, ram-jet fuel, petroleum rocket
fuels, synthetic natural gas feedstocks, and specialty oils).
|Motor Gasoline Blending Components
||Naphthas (e.g., straight-run gasoline, alkylate, reformate, benzene, toluene, xylene) used for
blending or compounding into finished motor gasoline. These components include reformulated
gasoline blendstock for oxygenate blending (RBOB) but exclude oxygenates (alcohols, ethers),
butane, and pentanes plus. Note: Oxygenates are reported as individual components and are
included in the total for other hydrocarbons, hydrogens, and oxygenates.
|Naphtha-Type Jet Fuel
||A fuel in the heavy naphtha boiling range having an average gravity of 52.8 degrees API,
20 to 90 percent distillation temperatures of 290 degrees to 470 degrees Fahrenheit, and
meeting Military Specification MIL-T-5624L (Grade JP-4). It is used primarily for
military turbojet and turboprop aircraft engines because it has a lower freeze point
than other aviation fuels and meets engine requirements at high altitudes and speeds.
||"Oxygenated Fuels Program Reformulated Gasoline" is reformulated gasoline which is intended
for use in an oxygenated fuels program control area during an oxygenated fuels program
||Finished motor gasoline, other than reformulated gasoline, having an oxygen content of
2.7 percent or higher by weight. Includes gasohol. Note: Oxygenated gasoline excludes
oxygenated fuels program reformulated gasoline (OPRG) and reformulated gasoline blendstock
for oxygenate blending (RBOB).
||A mixture of hydrocarbons, mostly pentanes and heavier, extracted from natural gas.
Includes isopentane, natural gasoline, and plant condensate.
|Petroleum Administration for Defense (PAD) Districts
||Geographic aggregations of the 50 States and the District of Columbia into five districts
by the Petroleum Administration for Defense in 1950. These districts were originally defined
during World War II for purposes of administering oil allocation.
Description and maps of PAD Districts and Refining Districts.
||Petroleum products are obtained from the processing of crude oil (including lease condensate),
natural gas, and other hydrocarbon compounds. Petroleum products include unfinished oils,
liquefied petroleum gases, pentanes plus, aviation gasoline, motor gasoline, naphtha-type jet
fuel, kerosene-type jet fuel, kerosene, distillate fuel oil, residual fuel oil, petrochemical
feedstocks, special naphthas, lubricants, waxes, petroleum coke, asphalt, road oil, still gas,
and miscellaneous products.
||Crude oil and product pipelines used to transport crude oil and petroleum products respectively,
(including interstate, intrastate, and intracompany pipelines) within the 50 States and the
District of Columbia.
||"Reformulated Gasoline Blendstock for Oxygenate Blending" is motor gasoline blending components
intended for blending with oxygenates to produce finished reformulated gasoline.
|RBOB for Blending with Alcohol
||Motor gasoline blending components intended to be blended with an alcohol component (e.g., fuel ethanol) at a terminal or refinery to raise the oxygen content. RBOB product detail by type of oxygenate was discontinued effective with data for January 2010. Beginning with data for January 2010, RBOB was reported as a single product.
|RBOB for Blending with Ether
||Motor gasoline blending components intended to be blended with an ether component (e.g., methyl tertiary butyl ether) at a terminal or refinery to raise the oxygen content. RBOB product detail by type of oxygenate was discontinued effective with data for January 2010. Beginning with data for January 2010, RBOB was reported as a single product.
|Reformulated Gasoline (RFG)
||Finished motor gasoline formulated for use in motor vehicles, the composition and properties
of which meet the requirements of the reformulated gasoline regulations promulgated by the
U.S. Environmental Protection Agency under Section 211(k) of the Clean Air Act.
This category includes oxygenated fuels program reformulated gasoline (OPRG) but excludes
reformulated gasoline blendstock for oxygenate blending (RBOB).
|Renewable Diesel Fuel (Other)
||Diesel fuel and diesel fuel blending components produced from renewable sources that are coprocessed with
petroleum feedstocks and meet requirements of advanced biofuels.
|Renewable Fuels (Other)
||Fuels and fuel blending components, except biomass-based diesel fuel, renewable diesel fuel, and fuel
ethanol, produced from renewable biomass.
|Residual Fuel Oil
||A general classification for the heavier oils, known as No. 5 and No. 6 fuel oils, that remain
after the distillate fuel oils and lighter hydrocarbons are distilled away in refinery operations.
It conforms to ASTM Specifications D396 and D975 and Federal Specification VV-F-815C.
No. 5, a residual fuel oil of medium viscosity, is also known as Navy Special and is defined in
Military Specification MIL-F-859E, including Amendment 2 (NATO Symbol F-770). It is used in
steam-powered vessels in government service and inshore powerplants. No. 6 fuel oil includes
Bunker C fuel oil and is used for the production of electric power, space heating, vessel
bunkering, and various industrial purposes.
||A yellowish nonmetallic element, sometimes known as "brimstone." It is present at various
levels of concentration in many fossil fuels.